Selector Lever Cable Assembly Overview

Selector Lever Cable Assembly Overview





1 Selector shaft lever

2 Mounting bracket

• For selector lever cable

3 23 Nm

4 Selector lever cable

• Do not bend or kink

• Lightly lubricate ball socket with polycarbamide grease (G 052 142 A2) before installing.

• Removing and installing => [ Selector Lever Cable ] Selector Lever Cable

• Adjusting => [ Selector Lever Cable, Checking and Adjusting ] Procedures

• In case of damaged rubber boot, selector lever cable must be replaced

• When installing, make sure rubber sleeve on transmission side is not twisted

5 Securing plate

• For selector lever cable

6 Selector lever cable rubber boot

• Make sure the selector lever cable rubber boot is engaged correctly on the selector mechanism shift unit and that it is sealed well

7 Securing plate

• For selector lever cable

8 9 Nm