Map Controlled Engine Cooling Thermostat

Map Controlled Engine Cooling Thermostat

Removing

- Drain coolant. Refer to => [ Cooling System, Draining and Filling ] Procedures.

- Disconnect electrical connector - arrow - on Map Controlled Engine Cooling Thermostat (F265).





• Ignore - 1 -.

- Remove coolant hoses - 1 and 2 - from Map Controlled Engine Cooling Thermostat (F265) and drain coolant.





- Remove bolts - arrows - and remove Map Controlled Engine Cooling Thermostat (F265).

Installing

• Tightening specifications. Refer to => [ Coolant Pump and Coolant Thermostat Assembly Overview ] Coolant Pump and Coolant Thermostat Assembly Overview.

Installation is in reverse order of removal, note the following:

• Replace sealing rings and O-rings.

• Secure all hose connections with hose clamps appropriate for the model.

- Fill with coolant => [ Filling ] Procedures.