Shift Cable: Description and Operation

Selector Lever Cable Overview






1 Clip

• For selector lever cable

2 Bolt

• 8 Nm

• Quantity: 2

3 Selector Lever Cable

• Do not bend

• Refer to => [ Selector Lever Cable ] Selector Lever Cable

• The selector lever cable must be replaced if the rubber grommet is damaged.

• Lightly lubricate ball socket with polycarbamide grease (G 052 142 A2) before installing.

• Make sure the rubber grommet on the transmission side is not twisted when installing.

• Refer to => [ Selector Lever Cable, Adjusting ] Adjustments

4 Cable Mounting Bracket

5 Bolt

• 13 Nm

• For selector lever cable adjustment

• Secured on the shift mechanism function unit

6 O-ring

7 Selector Shaft Lever