Procedures

Windshield Wipers, Bringing into Service Position

Risk of damaging the hood by running the wipers back in basic position.

• Do not drive a vehicle with windshield wiper arms folded up.

• The windshield wipers automatically go back into their rest position when the wiper switch is activated or when driving faster than 6 km/h.

• If the windshield wiper motor is to be run during the work procedure, the hood must be closed, otherwise the voltage supply of the wiper motor will be interrupted.

- Make sure the wiper blades are not frozen.

- Switch on ignition.

- Activate the menu entry windshield wipers on using the multimedia system control head (E380). Refer to the owner's manual.

• The windshield wipers run into service position.

- Turn off the ignition.