Engine Oil Cooler

Engine Oil Cooler

Special tools, testers and auxiliary items required

• Used Oil Collecting and Extracting Device (V.A.G 1782)

Removing

- Drain the coolant. Refer to => [ Cooling System, Draining and Filling ] Procedures.

- Remove the generator.

- Remove the bolts - arrows - and then the generator bracket.





- Remove the coolant hoses - 2 - and - 7 - from the engine oil cooler.





- Place the (V.A.G 1782) under the engine.

- Remove the bolts - 1, 3, 4, 5 and 6 - and remove the engine oil cooler.

Installing

Installation is in reverse order of removal, note the following:

• Replace O-rings.

• Secure all hose connections with hose clamps appropriate for the model.

- Install generator.

- Check oil level.

- Fill with coolant => [ Filling ] Procedures.

Tightening Specifications