Secondary Air Injection Right Combination Valve

Secondary Air Injection Right Combination Valve

Removing

- Remove right coolant pipe. Refer to => [ Right Coolant Pipe ] Right Coolant Pipe.

- Remove engine support bridge (10-222 A) from engine compartment.

• Engine support bridge (10-222 A) was necessary to remove right coolant pipe, but it hinders the following work sequence.

- Disconnect vacuum hose - 3 -.





- Remove bolts - 1 -, - 2 - and - 4 - and remove combination valve.

• Illustration depicts engine from rear.

Installing

Installation is in reverse order of removal, note the following:

• Replace seals.

- Install right coolant pipe. Refer to => [ Right Coolant Pipe ] Right Coolant Pipe.

Tightening Specifications