Power Take-Off Drive Chain

Power Take-Off Chain

Special tools, testers and auxiliary items required

• Old oil collecting and extracting device (V.A.G 1782 )

Removing

- Place old oil collecting and extracting device ( V.A.G 1782) under engine and drain engine oil.

- Remove engine. Refer to: Vehicles with manual transmission => [ Engine, Manual Transmission, Removing ] Engine, Manual Transmission, Removing, vehicles with automatic transmission => [ Engine, Removing ] Engine, Automatic Transmission, Removing and Installing.

- Disconnect engine and transmission. Refer to: Vehicles with manual transmission => [ Engine and Transmission, Separating ] Engine, Manual Transmission, Removing, vehicles with automatic transmission => [ Engine and Transmission, Separating ] Engine, Automatic Transmission, Removing and Installing.

- Leave engine on the Scissor Lift Table (VAS 6131 A) or secure the engine to the engine and transmission holder. Refer to: Vehicles with manual transmission => [ Engine, Securing to Engine and Transmission Holder ] Engine, Manual Transmission, Removing, vehicles with automatic transmission => [ Engine, Securing to Engine and Transmission Holder ] Engine, Automatic Transmission, Removing and Installing.

- Remove covers for timing chains. Refer to => [ Timing Chain Covers ] Timing Chain Covers.

- Push glide track of chain tensioner in direction of - arrow - and pull off chain tensioner using a drill bit 3.3 mm in dia. - 1 -.





• If chain sprocket for power take-off is to be removed, mounting bolt must be loosened before removing chain.

- Mark running direction of chain for power take-off with paint.

- Remove bolts - 2 to 5 - and remove chain tensioner.

- Remove chain for power take-off.

Installing

Installation is in reverse order of removal, note the following:

- First install chain for power take-off.

- Install chain tensioner starting at top on engine.

- Install covers for timing chains => [ Installing ] Timing Chain Covers.

- Install engine. Refer to: Vehicles with manual transmission => [ Engine, Installing ] Engine, Manual Transmission, Removing, vehicles with automatic transmission => [ Engine, Installing ] Engine, Automatic Transmission, Removing and Installing.

- Add engine oil and check oil level. Refer to => [ Oil Level, Checking ] Testing and Inspection.

Tightening Specifications