Turbocharger Air Intake Hose: Service and Repair

Hose Connections with Connector Couplings


Connector coupling sealing ring can be damaged if securing clamp is in locked position when installing. This would result in a leak. Follow assembly instructions.

Removing

- Release connector coupling by pulling locking clip - arrow -. Separate hose/tube without assistance from tools.






Installing

- When replacing sealing ring, lay ring in charge air hose groove. Ensure sealing ring sits completely in groove all the way around and is not turned.

- Oil sealing surfaces and sealing ring.

- Bring securing clip into release position - 1 -.






- Slide charge air hose into clutch as far as stop.

- Bring securing clip into lock position - 2 - and then press charge air hose back again.

- Check for correct seating and proper locking of connector by pulling on hose.