Rocker Arm Assembly: Service and Repair

Roller Rocker Lever

Removing

• Engine is removed. Refer to => [ Engine, Removing ] Engine, Removing.

- Remove the camshafts and adjusters, refer to one of the following:

• => [ Left Camshafts and Adjuster ] Left Camshafts and Adjuster.

• => [ Right Camshafts and Adjuster ] Right Camshafts and Adjuster.

- Mark the allocation of the roller rocker levers and shafts for reinstallation.

- Remove the bolts - arrows -.





- Thread a M6 bolt into the hole in the roller rocker lever shaft.

- Remove the shaft from the cylinder head and remove the roller rocker levers.

Installing

Installation is performed in the reverse order of removal, noting the following:

• Replace the O-rings.

- Before installing, oil the bearing areas for the roller rocker lever.

- Install the camshafts and adjusters, refer to one of the following:

• => [ Right Camshafts and Adjuster ] Right Camshafts and Adjuster.

• => [ Left Camshafts and Adjuster ] Left Camshafts and Adjuster.

Tightening Specifications