With Manufacturer Scan Tool

Diagnostic Trouble Code (DTC) Memory, Checking (scan Tool Function 02)


- Switch on printer with the PRINT button (indicator lamp in button lights up).

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press buttons 0 and 2 to select function "Check DTC memory."

Indicated on display:


Rapid data transfer Q
02 - Check DTC memory


- Press Q button to confirm input.

The number of stored malfunctions appears on display.


X DTC recognized! ->


The number of stored DTCs or "No DTCs recognized" appears in the display and they are printed one after the other.

- With printed list of malfunctions go to diagnostic trouble code table for instructions on how to correct malfunctions. Instrument Cluster/Carrier

If "No DTC recognized" is displayed, the program will return to the initial position after pressing the -> button.


No DTC recognized! ->


Indicated on display:


Rapid data transfer HELP
Select function XX


If display is different:
- End output (function 06). Code Control Module (Function 07)
- Switch off ignition and disconnect Data Link Connector (DLC).

Diagnostic Trouble Code (DTC) Memory, Erasing (scan Tool Function 05)


NOTE: If DTC memory cannot be erased, check DTC memory again and correct indicated malfunctions.


Requirements:
- DTC memory was checked.
- All malfunctions have been corrected

After checking DTC memory:

Indicated on display.


Rapid data transfer HELP
Select function XX


- Press buttons 0 and 5. Function 05 activates "Erase DTC memory."

Indicated on display.


Rapid data transfer Q
05 Erase DTC memory


- Press Q button to confirm input.

Indicated on display.


Rapid data transfer ->
DTC memory is erased!


With this the DTC memory is erased.
- Press -> button.

Indicated on display.


Rapid data transfer HELP
Select function XX


NOTE:
- If this message is displayed, the test program was not followed.


Attention
DTC memory was not checked


- If this message is displayed, the test program was not followed.


Rapid data transfer ->
DTC memory was not checked


- Follow test program exactly: first check DTC memory, correct malfunctions found, then erase DTC memory.