Login Procedure (Scan Tool Function 11)

Login procedure (scan tool function 11)

Note: In order to carry out this function, the dealer code in the VAG15511VAG1552 scan tool must have been entered. This is the dealer code for your dealership.





Indicated on display
- Press buttons -1- and -1- to select "Login Procedure" function 11.





Indicated on display
- Press the -Q- button to confirm input.





Indicated on display
- Enter the relevant code for the vehicle and press -Q- button to confirm input.
- The code for logging in for zeroing of steering angle sensor -G85- is 40168.
- For the codes for logging in to code the ABS control module -J104- table .