Output Diagnostic Test Mode (Function 03)

NOTES:
- The Output Diagnostic Test Mode (DTM) may only be performed with the vehicle stationary and the engine not running.
- Any malfunctions identified by the output Diagnostic Test Mode (DTM) must be traced and eliminated.
- The output DTM is used to test the loudspeaker wiring and the secondary display.

Performing Output DTM
- Press buttons -0- and -3- to select "Output Diagnostic Test Mode" function 03.

Indicated on display
Rapid data transfer Q
03 - Output Diagnostic Test Mode

- Press -Q- button to confirm input.

Indicated on display
Output Diagnostic Test Mode ->
Loudspeakers

- All loudspeakers will receive a brief electrical pulse (inaudible).

NOTE: Any malfunctions (e.g. short circuits) that occur will be recorded in DTC memory.

- Press -> button.

Indicated on display
Output Diagnostic Test Mode ->
Output radio display dash panel insert

- "DISPLAY ... TEST" will appear on the secondary display in the instrument cluster.
- Press -> button.

Indicated on display
Output Diagnostic Test Mode ->
End

- Press -> button (returns scan tool to "Select function XX" prompt).

Indicated on display
Rapid data transfer HELP
Select function XX