Track 68-78

Diagrams By Track Number

6-Cyl., Multipoint Fuel Injection, Heated Oxygen Sensor - Track 68-78:

Fuse colors
30 A - green
25 A - white
20 A - yellow
20 A - blue
15 A - red
5 A - beige



Track Continuations


Previous Diagram Track 55-67
Next Diagram Track 79-90



COMPONENTS
N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve
G108 - Heated Oxygen Sensor (HO2S) 2
G39 - Heated Oxygen Sensor (HO2S) 1
S73 - Heated Oxygen Sensor (HO2S) Circuit Breaker
N71 - Idle Air Control (IAC) Valve
N156 - Intake Manifold Change-Over Valve
J192 - MFI Engine Control Module (ECM)
Z19 - Oxygen Sensor (O2S) Heater
Z28 - Oxygen Sensor (O2S) 2 Heater


GROUNDS CONNECTIONS
NOTE: Grounds connections are indicated on the diagram by a numeric code inside a circle.

85 - Ground connection -1-, in engine compartment wiring harness

HARNESS SPLICES

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle.

D80 - Plus connection (87a) - for EVAP system solenoid), in engine compartment wiring harness