Electric Motor Front Seat Cushion

Electric motor front seat cushion

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Information

Method content

This method consists of:
- Electric motor, front height adjustment, replacing
- Electric motor, rear height adjustment, replacing
- Electric motor, front/rear adjustment, replacing

Electric motor, front height adjustment, replacing

Removing the electric motor for front height adjustment





Remove:
- the front seat as described in
- the 2 M6 screws (1)
- the M8 screw (2).




Remove the connector by moving it to the side.

Installing the electric motor for front height adjustment


Install:
- the connector
- the electric motor
- the 2 M6 screws
- the M8 screw.
- the front seat as described in.

Electric motor, rear height adjustment, replacing

Removing the electric motor for rear height adjustment




Adjust the seat to its topmost position.

Remove:
- the side panel as described in
- the cable tie (2)
- the 3 x screws (1)




- the 1 M6 screw
- the electric motor




Remove the connector by moving it to the side.

Installing the electric motor for rear height adjustment


Install:
- the connector
- the electric motor
- the 3 M6 screws
- the 1 M6 screw
- the cable tie
- the side panel as described in.

Electric motor, front/rear adjustment, replacing

Removing the electric motor for front/rear adjustment





Remove:
- the front seat as described in
- the 2 M5 screws
- the electric motor and cables.




Remove the connector by moving it straight back.

Installing the electric motor for front/rear adjustment






Hint: If the distance between the two rails differs, fasten the short cable in an electric screwdriver and screw until the rails align.

Install:
- the connector
- the electric motor and cables
- the 2 M5 screws
- the front seat as described in.