Rear Window Molding

Rear window molding

Operation number: 84142

Note! Some variation in the illustrations may occur, but the essential information is always correct.






Removal





Installation





Caution! Make sure that the mating surfaces are clean.

Use: Cleaning agent, 9192 678-2, x 3.

Caution! Make sure that all mating faces are free of moisture.

Caution! Apply even pressure along the entire component.

Note! Make sure that the mating faces are at a minimum temperature of 16 °C (60.8 °F).

Note! Make sure that the customer is advised not to wash the vehicle within the next 72 hours.