Lead Battery to Central Electrical Unit Engine Compartment

Electrical Distribution Box, Fuse Box, B5254T3

Lead battery to central electrical unit engine compartment

Operation number: 37205-2

NOTE: Some variation in the illustrations may occur, but the essential information is always correct.





Removal

NOTE: Removal steps in this procedure may contain installation details.





Disconnect the negative battery lead.





Torque: Battery lead to battery lead terminal, 14 Nm





Remove the relay/fuse holder's screws, 2 pcs. Lift the relay/fuse holder straight up at the trailing edge. Remove the lower casing.





NOTE: Note the position of the relays. Remove relays and fuses from the relay/fuse holder as needed.

Remove the front secondary catch, lift with a screwdriver.





Remove the thin cable.
Special Tool: 951 2636





Alternatively.
Special Tool: 951 2852

Installation
Install in reverse order.