Checking Components and Wiring

Checking Components And Wiring







- Ignition off

Check the oil level sensor connector for contact resistance and oxidation.

Disconnect the engine control module (ECM).

Check the power cable for open-circuit. Measure between control module terminal #A47 (#A47) and oil level sensor terminal #3.

Check the signal cable for open-circuit. Measure between control module terminal #A63 (#B3) and oil level sensor terminal #1.

Remedy as necessary.

Other Information
- Connecting the breakout box
- Signal specification, engine control module (ECM)
- Oil level sensor, replacing
- Checking wiring and terminals

Continue: Refer to Verification. Verification