Checking Components and Wiring

Checking Components And Wiring







Check connector for contact resistance and oxidation.

Check voltage feed between engine control module (ECM) #B32 (#C32) and accelerator pedal position sensor #6.

Check the ground cable between engine control module (ECM) #B7 (#C7) and accelerator pedal position sensor #4.

Check the cable between engine control module (ECM) #B28 (#C28) and accelerator pedal position sensor #2.

Remedy as necessary.

Other Information
- Connecting the breakout box
- Signal specification, engine control module (ECM)
- For replacing accelerator pedal position sensor: Accelerator pedal (AP), replacing
- Checking wiring and terminals

Continue: Refer to Verification. Verification