Checking Components and Wiring

Checking Components And Wiring







- Ignition off

Check the engine speed sensor connections for contact resistance and oxidation.

Check that the engine speed sensor is properly installed and in the correct position.

HINT: The engine speed sensor and its cables are sensitive to disruptions from nearby cables, such as the starter motor cable or a similar cable with a high current rating.

Check if a cable with high current consumption is improperly installed, that is to say lies too close to the engine speed sensor or its cables.

HINT: The cause of this diagnostic trouble code can also be damage to the flywheel reference holes for the engine speed sensor.

Remedy as necessary.

Other Information
- Engine speed (RPM) sensor, replacing
- Checking wiring and terminals

Continue: Refer to Verification. Verification