Start Adaptations

Start Adaptations







Test-drive the vehicle on road and drive a little in different operating situations for 20 minutes, in order to complete as many adaptations as possible.

Check and note if any adaptation range is still incorrect by scrolling through the list with adaptation ranges.

The adaptation value is considered outside normal range if it is lower than 0.85 or higher than 1.15.

HINT: Also, perform a few full throttle accelerations to perform the adaptations that are not affected by normal driving.

For adaptation to start, certain conditions must be fulfilled

- Engine speed greater than or equal to 600 rpm.
- Engine temperature between 80-110 degree C.
- Adaptation active = executed.
- EVAP-valve not active = 0 mu.s.

HINT: At high fuel vaporization the EVAP-valve is active longer time and then it may be necessary to disconnect the hose between the EVAP-valve and the canister.

Are these values OK?

YES: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions
NO: Refer to Fault-Tracing Information - Permanent Fault.