Checking Components and Wiring

Checking Components And Wiring







Check the cable between engine control module (ECM) #B24 (#C24) and accelerator pedal position sensor #5 for short-circuit to ground and open circuit.

Check the voltage feed from engine control module (ECM) #B32 (#C32) to accelerator pedal position sensor #6 for open circuit.

Check the ground cable between engine control module (ECM) #B7 (#C7) and accelerator pedal position sensor #4 for open circuit.

Remedy as necessary.

Other Information
- Connecting the breakout box
- Signal specification, engine control module (ECM)
- For replacing accelerator pedal position sensor: Accelerator pedal (AP), replacing
- Checking wiring and terminals

Continue: Refer to Verification. Verification