Troubleshooting

Troubleshooting

Checking the status




- Ignition on, wait for at least 15 seconds to perform the diagnosis.
Read off diagnostic trouble code status.
Check if the malfunction is permanent or intermittent by reading off the diagnostic trouble code's status when the diagnostic status is "Implemented".
If the trouble status is "Malfunction found", this indicates that the malfunction is permanent. If the trouble status is "No malfunction found", this indicates that the malfunction is intermittent.









Continue - Replacing the component

-------------------------------------------------

Replacing the component
The engine control module (ECM) has registered an internal malfunction.
If the malfunction is intermittent, it has been registered previously but no longer remains. Intermittent malfunctions can be due to disruption when the engine control module (ECM) started or can be another type of malfunction that may recur at different instances. The malfunction is assessed on a case by case basis. If the malfunction recurs, replace the engine control module (ECM).
In case of permanent malfunction, replace the engine control module (ECM).
Remedy as necessary.

Other information
- Engine control module (ECM), replacing Service and Repair





Continue - Troubleshooting information

-------------------------------------------------

Troubleshooting information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - Exit Fault-Tracing

------------------------

Attempt New Test - Checking the status

-------------------------------------------------