Diagnostic Trouble Code (DTC) Information

ECM-U012100 Failed Communication With Brake Control Module

Condition
The control modules transmit and receive information via a standardized serial communication method - CAN (Control Area Network). If engine control module (ECM) registers a communication malfunction between brake control module (BCM) and engine control module (ECM), the diagnostic trouble code is stored in engine control module (ECM).

Substitute Value
- Nothing.

Possible Source
- Contact resistance or oxidation in the connections.
- Open circuit on one of the CAN-cables.
- Short-circuit between the control area network (CAN) wiring.
- Internal malfunction in engine control module (ECM).
- Internal malfunction in another control module in the same part of the CAN-network.

Fault Symptom[s]
- Anti-spin is not operational.