Fault-Tracing Information
Information
There is no troubleshooting for this diagnostic trouble code (DTC). A diagnostic trouble code for CAN-communication can also be generated in the central electronic module (CEM). In some instances, the diagnostic trouble code is generated in other related control modules. This code should not be erased until the code in the central electronic module (CEM) and other related control modules has been remedied and erased. Thus, first read out diagnostic trouble codes (DTCs) in the central electronic module (CEM) and other related control modules, perform troubleshooting and take appropriate action. After that, this code can be erased. For more information on this diagnostic trouble code, select Information and then Diagnostic trouble code information.
Other Information
- General information about fault-tracing in the CAN network
HINT: Try using the Information Manager if the desired diagnostic trouble code information cannot be found.
Select "Continue" to exit.
Continue: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions