Diagnostic Trouble Code (DTC) Information

ECM-P240200 EVAP Emission System, Leakage Diagnosis Pump Control Circuit High

Condition







The engine control module (ECM) checks the control signal to the leakage diagnosis pump.

The diagnostic trouble code is generated if the control module registers a fault in the control signal to the leakage diagnosis pump.

The diagnostic trouble code can be diagnosed when the ignition is on.

Substitute Value
- Leakage diagnosis interrupted.

Possible Source
- The signal cable is short-circuited to supply voltage
- Damage leakage diagnosis pump.

Fault Symptom[s]
- Malfunction indicator lamp (MIL) lit.