Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Checking the Status



Checking The Status







- Ignition on, wait for at least 15 seconds to carry out diagnostics.

Read the diagnostic status and fault status for the diagnostic trouble code by selecting the diagnostic trouble code in the list.

Check whether the fault is permanent or intermittent. Read off the diagnostic trouble code (DTC) fault status when the diagnostic status is "Completed".

The fault is permanent if the fault status is "Fault found". If the fault status is "No fault found" the fault is intermittent and not presently active.

NOTE: The fault status cannot change from "Fault found" to "No fault found" in the same operating cycle.

Continue: Refer to Replacing the Component. Replacing the Component