Verification

Verification







HINT: After repairing, it is necessary to check that the malfunction has been fixed.

- Ignition off
- Reinstall the connectors, components etc.
- By once again starting quick-test of EVAP-valve and checking result, one can confirm if the work has fixed the malfunction.
- Engine idling during the entire test.

Activate quick-test EVAP-valve. The test takes a few seconds.

Check that the result shows "No malfunction found". This indicates that the malfunction has been fixed and the function is OK.

Is the function OK?

YES: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions
NO: Refer to Fault-Tracing Information - Permanent Fault.