Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Checking the Status



Checking The Status







- Start the engine.

Read the diagnostic status and fault status for the diagnostic trouble code by selecting the diagnostic trouble code in the list.

Check whether the fault is permanent or intermittent by reading the fault status of the trouble code when the diagnostic status is "Completed".

If the fault status is "Fault found", the fault is permanent. If the fault status is "No fault found", the fault is intermittent and not currently active.

NOTE: The fault status cannot switch from "Fault found" to "No fault found" within the same operating cycle.

Continue: Refer to Checking Components and Wiring. Checking Components and Wiring