Faulty Frequency Setting. Permanent Fault

Faulty frequency setting. Permanent fault

Replacing audio unit
The diagnostic trouble code (DTC) is stored when the head unit/audio control module frequency settings does not correspond to the car market settings.

Caution! A new head unit/audio control module (AUM) is delivered without software. The head unit/audio control module must be programmed after it has been replaced.

Other information:
- For further information about the programming and replacing the audio unit see Radio cassette player, replacing Radio Cassette Player, Replacing.

Select "Continue" when the fault has been remedied.

Continue - Verification

-------------------------------------------------

Verification




Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Reinstall connectors, components etc.
- Ignition on.
Check that radio reception functions.

Does radio reception function?

Yes - Verification completed

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-Tracing

No - Attempt New Test

------------------------

Attempt New Test - Replacing audio unit

-------------------------------------------------