Replacing the Oil Pressure Sensor

Replacing the oil pressure sensor

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information is always correct.

Removing the oil pressure sensor




Remove the hose from the charge air pipe.

Remove:
- the screw for the charge air pipe in the cylinder block
- the connector from the oil pressure sensor
- the oil pressure sensor. Use a long 24 mm socket.
Place paper underneath in case of oil leakage.

Installing the oil pressure sensor





Install:
- the new pressure sensor
- the connector
- the screw for the charge air pipe in the cylinder block
- the hose on the charge air pipe.