Rear Pulse Wheel

Replacing The Rear Pulse Wheel

Removal

Removing the wheel hub
Switch off the ignition.
Remove the wheel hub

Replacing the rear pulse wheel







- Remove the 2 screws
- Remove the pulse wheel.

Installation

Installing the wheel hub, brake caliper and wheel
- Clean the hub. Install the new pulse wheel
- Tighten to 25 Nm
- Install the wheel hub, the brake caliper and wheel.

Final check
- Read off and erase any diagnostic trouble codes (DTCs)
- Test drive the car
- Check whether any diagnostic trouble codes (DTCs) have been stored. Read off any stored DTCs.