Checking the Dynamic Stability Assistance (DSA) Warning Lamp

Fault-Tracing Information







HINT: After carrying out the repair, check that the fault has been remedied as follows:
- Ignition off.
- Reconnect the connectors, reinstall components etc.
- Start the engine.
- Activate the DSA warning lamp by clicking on the VCT 2000 symbol.
- Check that the warning lamp flashes at a frequency of 1.8 Hz.

Does the warning lamp flash when the function is activated?

YES: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions
NO: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions