Internal Fault

Internal fault

Checking the control module




- Ignition on
- Activate solenoid SLS.
Read off the current through the solenoid SLS circuit.
The current should oscillate between 0 and 1000 mA.





Does the current oscillate?

Yes - Fault-tracing information

No - Replacing the control module

-------------------------------------------------

Replacing the control module
For further information and to replace the control module, see Replacing the transmission control module (TCM), AW55-50/51SN Service and Repair.





Continue - DONE

-------------------------------------------------

Fault-tracing information
The control module has previously registered a fault.
No further fault-tracing is required.

Continue - DONE

-------------------------------------------------