Internal Fault

Internal fault

Checking the control module








- Ignition on
- Gear selector in position P
- Activate solenoid S3.
The value should change between OFF and ON.





Does the value change between OFF and ON?

Yes - Fault-tracing information

No - Replacing the control module

-------------------------------------------------

Replacing the control module
For further information and to replace the control module, see Replacing the transmission control module (TCM), AW55-50/51SN Service and Repair.





Continue - DONE

-------------------------------------------------

Fault-tracing information
The control module has previously registered a fault.
No further fault-tracing is required.

Continue - DONE

-------------------------------------------------