Signal Too Low. Intermittent Fault

Signal too low. Intermittent fault

Checking the connectors




- Ignition off.
Check the connectors for the boost pressure sensor and the engine control module (ECM). Check for contact resistance and oxidation according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults. Check for loose connections according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults. Check for damage carefully.

Other information:
- To connect the breakout box, see Connecting the breakout box. EMS 2000 Connecting The Breakout Box. EMS 2000
- Signal specification Signal Specification
- Boost pressure sensor 1, replacing Boost Pressure Sensor 1, Replacing













Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Checking the connectors

FAULT FOUND - DONE

-------------------------------------------------