Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
At engine start-up the control module checks that the camshaft is in the correct position in relation to the crankshaft. Diagnostic trouble code (DTC) ECM-62 is stored if the control module detects the camshaft in an incorrect position on start up.

Substitute value
None.

Possible source
- Camshaft cogs incorrectly seated
- Incorrectly installed camshaft pulley
- Contact resistance in the terminals.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit
- The engine misfires.