Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




When the reset button on the mode selector for the trip computer is pressed, the three signals A, B and C are grounded to the combined instrument panel. Diagnostic trouble code (DTC) DIM-16 is stored if the control module registers that the signals are too low for more than 25 seconds.
This diagnostic trouble code (DTC) cannot be stored in Bi-fuel cars.

Substitute value
None.

Possible source
- short-circuit to ground in the signal cables A, B and C
- the trip computer reset button is pressed in for more than 25 seconds
- the trip computer reset button is mechanically or electrically defective.

Fault symptom[s]
- the trip computer displays faulty values.