Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




Diagnostic trouble code (DTC) DIM-09 is stored in the combined instrument panel if the fuel consumption calculator is not updated in the combined instrument panel, at the same time as the engine speed (RPM) is higher than 400 rpm and the vehicle speed is 0 km/h for more than 900 seconds.
This diagnostic trouble code (DTC) cannot be stored in Bi-fuel cars.

Substitute value
None.

Possible source
- short-circuit to ground in the signal cable
- short-circuit to supply voltage in the signal cable
- open-circuit in the signal cable or in the ground lead
- defective engine control module (ECM)
- defective combined instrument panel.

Fault symptom[s]
- the fuel consumption calculator in the trip computer displays an incorrect value.