Faulty Signal. Intermittent Fault

Faulty signal. Intermittent fault

Checking for interference




- Ignition off.
Check that the wiring between combined instrument panel connector B #15 and:
- central electronic module (CEM) B2 #16
- each engine control module (ECM) connector
- ECC connector #4
- cruise control connector #13
is not too close to sources of interference such as electric motors, ignition cables and car telephone wiring.

Other information
- For information about signals, see Signal specification Signal Description. Central Electronic Module (CEM).





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Checking for interference

FAULT FOUND - DONE

-------------------------------------------------