Rear Center Console, Components

Rear Center Console, Components

Special Tools: 981 4071

Removing The Armrest







Remove:
- the rear center console
- the waste paper basket(A)
- the two screws
- the rear panel (B) carefully. Use weatherstrip tool 981 4071
- the four screws
- the armrest assembly.

Installing The Armrest

Install:
- the armrest
- the four screws
- the rear panel (B) carefully
- the two screws
- the waste paper basket(A)
- the rear center console.

Removing And Installing The Mug Holder

Removing The Mug Holder And The Rubber Lining







Remove the rear center console.

- Remove the screws (6). Lift out the mug holder
- Remove the rubber lining.

Installing The Mug Holder And The Rubber Lining







Align the rubber lining in the bottom of the mug holder.

Install:
- the mug holder in the bracket.
Screw into place using 6 screws
- the rear center console.

Removing And Installing The 12 Volt Socket

Removing The 12 Volt Socket







Remove:
- the rubber underlay (1)
- the gear selector panel (2) by pressing in the lugs and removing the connector.

Open the catches. Remove the 12 volt socket.

Installing The 12 Volt Socket

Install:
- 12 volt socket. Check that the socket is secure
- the connector. Press the gear selector panel (2) into place
- the rubber underlay (1).

Removing and installing the center console locker for the rear center console

Removing The Center Console Locker From The Rear Center Console







Remove:
- the rear center console
- the four screws
- the front center console locker
- the front armrest
- the four screws
- the rear center console locker.

If there is damage: replace the cover.

Installing The Center Console Locker For The Rear Center Console

Install:
- the rear center console locker
- the four screws
- the front armrest.
- the front center console locker
- the four screws
- the rear center console.