Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
Diagnostic trouble code (DTC) CEM-0002 is stored if the control module registers that the signal from the high beam flash in the turn signal lamp switch is low for more than 180 seconds.

Substitute value
None

Possible source
- Short-circuit to ground in the signal cable from the turn signal lamp switch
- Defective turn signal lamp switch
- The high beam flash has been active for 180 seconds

Fault symptom[s]
- The high beam flash does not work
- The timer for the follow-me home lights does not function