Checking The Fuel Gauge

Checking the fuel gauge

Activating the fuel gauge








- Ignition on.
Click the VCT2000 symbol to activate the fuel gauge test function. Check that the gauge is operating correctly. If the fuel gauge does not react to activation it indicates that the combined instrument panel is faulty. Try a new combined instrument panel.

Other information
- For information about activating the fuel gauge, see Description of component / function activation Description Of Component / Function Activation
- To access or replace the combined instrument panel, see Driver information module (DIM), installation/removal, component replacement Removal and Replacement





Did the fuel gauge function?

Yes - No Fault Found

No - Verification

-------------------------------------------------

Verification




Verification

Hint: After carrying out the repair, check that the fault has been remedied.




- Ignition off.
- Reinstall the connectors, components etc.
Check that the fuel gauge is within its permitted range.

Is the fuel gauge within its permitted range?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFIED - FAULT FOUND

VERIFICATION FAILED - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Activating the fuel gauge

-------------------------------------------------