Manual Transmission

Rear center console

Removing the rear center console





Remove:
- the rubber underlay (1)
- the gear selector panel (2) by pressing in the lugs.
Manual transmissions only:
Press in the clip and remove the gear selector lever boot.
Apply the parking brake.
Remove the guard (3) and screw (4).
Pull the rear center console upwards at the front edge. Remove the gray connector.
Remove the rear center console.

Installing the rear center console

Install:
- the gray connector
- the rear center console
- the screw (4) and guard (3)
- the gear selector panel (2). Check that the clip has engaged
- Manual transmissions only: the gear selector lever boot
- the rubber underlay (1).