Configuration Fault. Permanent Fault

Configuration fault. Permanent fault

Installing new signal configuration
Because the audio control module has registered that the signal configuration is missing or is faulty, a new signal configuration needs to be programmed.

Other information:
- For information about programming and replacing the head unit/audio control module see Radio cassette player, replacing Radio Cassette Player, Replacing.

Select "Continue" when the fault has been remedied.

Continue - Verification

-------------------------------------------------

Verification




Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Reinstall connectors, components etc.
- Ignition on.
- Select FM with the "SOURCE" knob.
- Select AM with the "SOURCE" knob.
- If the audio unit has a cassette player: Insert a cassette and select the cassette deck with the "SOURCE" knob.
- If the audio unit has a CD player: Insert a CD and select CD with the "SOURCE" knob.
- If the car has a CD changer: Insert a CD in the CD changer and select CD changer with the "SOURCE" knob.
Read off diagnostic trouble codes (DTCs) and check that diagnostic trouble code (DTC) has modified status to intermittent.





Has the diagnostic trouble code (DTC) modified status to intermittent?

Yes - Verification completed

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-Tracing

No - Attempt New Test

------------------------

Attempt New Test - Installing new signal configuration

-------------------------------------------------