Diagnostic Trouble Code Information

Diagnostic trouble code information

Condition





Note! This diagnostic trouble code applies only to ABS systems equipped with DSTC.

The yaw-velocity sensor signals to the ABS control unit the extent to which and the direction in which the car is yawing. If the control unit registers a faulty signal from the yaw-velocity sensor, diagnostic trouble code ABS-00A0 or ABS-00B2 is set, depending on the sensor.

Substitute value
- Anti-spin function blocked.
- Stabilizing function blocked.

Possible source
- Open circuit in wiring.
- The wiring is short-circuited to ground or voltage supply.
- Loose yaw-velocity sensor.
- Defective yaw-velocity sensor.
- Defective control unit.

Fault symptom[s]
- Anti-spin does not work.
- Stabilizing function not working.
- Anti-spin warning lamp is on.