Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
Diagnostic trouble code (DTC) ECM-32 is stored if the control module does not receive a signal from the camshaft position (CMP) sensor (signal missing) or if the control module cannot interpret the signal from the camshaft sensor (faulty signal).

Substitute value
None.

Possible source

Signal missing:
- Contact resistance in the terminals
- Open-circuit in the signal cable
- Short-circuit to ground in signal cable
- Short-circuit to supply voltage in the signal cable
- Defective camshaft position (CMP) sensor.

Faulty signal:
- Contact resistance in the terminals
- Defective camshaft position (CMP) sensor.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit.