Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition





Diagnostic trouble code (DTC) CCM-001F is stored if the climate control module registers that the diagnostic signal from the blower fan motor is high for more than 2 seconds when the blower fan motor is activated.

Substitute value
The climate control module signal for control of the blower fan is disengaged.

Possible source
- Contact resistance or oxidation in the terminals
- Open-circuit in the signal cable for the diagnostic signal
- Open-circuit in the ground lead for the power unit
- Short-circuit to supply voltage in the signal cable for the diagnostic signal
- Defective power unit.

Fault symptom[s]
- The blower fan does not operate
- The blower fan only runs at one speed.