Signal Specification Road Traffic Information (RTI)

Signal specification Road Traffic Information (RTI)

All values given below are between the respective terminal in column 1 and terminal 8B (ground) unless otherwise stated in brackets after the table entry.







The MSA engine control module (ECM) terminals A1 - A30 correspond to # 1 - # 30 on the breakout box.







The RTI control module terminals B1 - B16 correspond to # 31 - # 46 on the breakout box.

NOTE: It is important to connect the breakout box and check the ground terminal before measuring.

U = DC voltage in volts (V)
f = Frequency in Hertz (Hz)
Ulow = Voltage approximately 0 V %
duty = Duty cycle (pulse ratio) as a percentage (%)
Ubat = Battery voltage

Connector A, A1 - A30










Connector B, B1 - B16