Round Connector

12-pin connector

Replacing cable terminals

Separating the connector halves




- Press in the catch on the socket housing and separate the connector halves.
- If necessary use terminal removal tool951 2812 Terminal removal tool 951 2812 Terminal Removal Tool.
Caution! Never pull on the cables when separating. Use the terminal removal tool.

Extract the cable terminal, pin housing




- Release the front housing section of the pin housing.




- Remove the cable terminal, see Using terminal removal tools Using Terminal Removal Tools.
Hint: Use terminal removal tool951 2632 Terminal removal tool 951 2632 Terminal Removal Tool.

Extract the cable terminal, socket housing




- Release the front housing section of the socket housing.




- Remove the cable terminal, see Using terminal removal tools Using Terminal Removal Tools.
- Replace cable terminal. Selecting cable terminal, see New cable terminal New Cable Terminal.
Hint: The following cable terminals are available for the relevant pin housing: 916 8503, 916 8505, 916 8509, 916 8513.
The following cable terminals are available for the relevant socket housing: 916 8502, 916 8504, 916 8508, 916 8512.

Hint: Use terminal removal tool951 2810 Terminal removal tool 951 2810 Terminal Removal Tool or951 2632 Terminal removal tool 951 2632 Terminal Removal Tool.

Crimp new cable terminal




- Strip the cable see Stripping the cable Stripping the Cable.
- Crimp cable terminal, see Crimping a cable terminal Crimping a Cable Terminal.

Insert the new cable terminal in the housing
- Insert the new cable terminal in the receptacle housing from the cable side (in the correct position). A click is heard when it hooks into place.
- Carefully pull on the cables to check that the terminal is firmly attached.

Reassemble the connector




- Release the front housing sections of the pin and socket housings.
- Assemble the connector halves.