Checking Interference from the Seat Heater

Checking interference from the seat heater

Checking the component

Note! This check only applies to chassis number 29668-147860.

Interference in the audio system when the seat heater is activated can occur as a pulsing buzzing sound.
The problem can be remedied by installing an adapter cable (P/N 9452668) with resistor in series with the seat heating module on both the front seats.
Check that the interference has been remedied before delivery to the customer.

Other information:
- To install the adapter cable, see Installing the adapter cable Installing the Adapter Cable.

Was a fault detected?

Yes - FAULT FOUND

No - FAULT NOT FOUND

-------------------------------------------------